| CA6140 CA6140B | CA6240 CA6240B | CA6150 CA6150B | CA6250 CA6250B |
|
|
| 床身上工件直径 Max. Swing over bed | 400mm | 500mm |
| 刀架上工件直径 Max. Swing over carriage | 210mm | 300mm |
| 马鞍槽工件直径 Max. Swing in gap | - | 630mm | - | 720mm |
| 马鞍槽有效长度 Effective gap length | - | 210mm | - | 210mm |
| 工件长度 Max. Length of workpiece | 750mm or 1000mm or 1500mm or 2000mm or 3000mm |
| 床身宽度 Width of bed | 400mm |
| 刀杆截面 Section of turning tool | 25X25mm |
| 主轴 Spindle | 主轴转速范围 Spindle speeds | 11—1600 r/min (24 steps) |
| 主轴内孔 Hole though spindle | 52mm(80mm) |
| 主轴孔锥度 Spindle taper | Morse No.6 (莫氏6号) |
| 进给 Feed | 进给数量 No. of feeds | 64种(kinds)(for each) |
| 公制螺纹Range of metric threads (kinds) | (1-192mm)44种(44kinds) |
| 英制螺纹 Range of inch threads(kinds) | (1-24tpi)21种(21kinds) |
| 模数螺纹 Rage of module threads(kinds) | 0.25-48(模数39种)(Module 39 kinds) |
| 径节螺纹 Rage of Diametral pitc threads (kinds) | 1-96DP(37种)(37 kinds) |
| 床尾 Tailstock | 床尾主轴行程 Max tailstock spindle travel | 150mm |
| 床尾主轴直径 Tailstock spindle diameter | 75mm |
| 床尾主轴孔锥度 | Morse No.5 (莫氏5号) |
| 主电机 Main motor | 7.5KW(10HP) |
021-61207839