AB 2711E-K10C15 PanelView工控机

2711E-K10C15 PanelView工控机

2711E-K12C6 PanelView工控机

2711E-K12C6L2 PanelView工控机

2711E-T12C6 PanelView工控机

2711E-T12C4 PanelView工控机

important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines  for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local  Rockwell Automation sales office or online at http://literature.rockwellautomation.com) describes some important differences  between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the  wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves  that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the  use or application of this equipment. The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and  requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability  for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or  software described in this manual. Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is  prohibited. Throughout this manual, when necessary, we use notes to make you aware of safety considerations. Rockwell Automation, Allen-Bradley, TechConnect, PanelView, PanelView Component, and MicroLogix are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. WARNING Identifies information about practices or circumstances that can cause an explosion in a  hazardous environment, which may lead to personal injury or death, property damage, or  economic loss. importANT Identifies information that is critical for successful application and understanding of the product. ATTENTION Identifies information about practices or circumstances that can lead to personal injury or death,  property damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and  recognize the consequence SHOCK HAZARD Labels may be on or inside the equipment, for example, a drive or motor, to alert people that  dangerous voltage may be present. BURN HAZARD Labels may be on or inside the equipment, for example, a drive or motor, to alert people that  surfaces may reach dangerous temperatures.                 
                 

优势供应，充足库存

Human Interface Module, Snap-In, IP20 (NEMA Type 1) HASB Snap-In Cradle/Blank Plate HASP Programmer only HCSP Programmer only & Upload/Download Capability HAS1 Programmer/Controller w/Analog Pot HCS1 Programmer/Controller w/Analog Pot & Upload/Download Capability HAS2 Programmer/Controller w/Digital Pot HCS2 Programmer/Controller w/Digital Pot & Upload/Download Capability Human Interface Module, IP65/54 (NEMA Type 4/12) HJP Programmer only HJ2 Programmer/Controller w/Digital Pot Communication Options –- B frame & Up (Adapter 6) GM1 Single Point Remote I/O B frame GM2 RS-232/422/485, DF1 & DH485 B frame GM5 DeviceNet™ GM6 Enhanced DeviceNet™  Communication Options –- All frames (Adapter 1) GMS1 GM1 with Snap-In Cradle GMS2 GM2 with Snap-In Cradle GMS5 GM5 with Snap-In Cradle GMS6 GM6 with Snap-In Cradle  Control Interface Options L4 TTL Contact L4E TTL Contact & Encoder Feedback L7E TTL Contact & Encoder Fdbck. for use with Encoder Loss Detection L5 24V AC/DC L5E 24V AC/DC & Encoder Feedback L8E 24V AC/DC & Encoder Feedback for use with Encoder Loss  Detection L6 115V AC L6E 115V AC & Encoder Feedback L9E 115V AC & Encoder Feedback for use with Encoder Loss Detection Analog Interface Options – Slot A • Choose No More than One • Configurable Inputs/Outputs are 10V or 20mA LA2 Two Isolated Configurable Inputs LA6 One Isolated Bi-polar Input (±10V or ±20mA) and One Isolated  Thermistor Input LA7 One Isolated Bi-polar Input (±10V or ±20mA) and One Isolated  Configurable Input Analog Interface Options – Slot B • Choose No More than One • Configurable Inputs/Outputs are 10V or 20mA LA1 Single-ended, Non-isolated Configurable (including Pot) Input & 2  Single-ended, Non-isolated Outputs (1 - Configurable, 1 - 20mA) LA3 Two Isolated Configurable Outputs LA4 One Isolated Configurable Input & Output  LA5 Isolated Pulse Input, Non-isolated Pulse Output & Single-ended,  Non-isolated Configurable Output

我们是一家从事工控（智能）自动化设备维护和销售的公司，主要经营国内外的工控行业品牌

产品销售、集成和维护服务。

公司的核心理念：团结、诚信。热情而富有精神，成为工业控制行业的工匠。

公司的成立只有一条：以客户为中心。

受硬件、软件、平台和资源的启发，公司致力于打造更加完善的国内工控产品销售和技术服务平台

系统，涵盖产品选型、售后技术咨询服务、工厂维护、产品功能测试、工控产品销售

五部分

公司本着“客户首先、以人为本、服务首先”的原则，建立和完善了严格的产品质量标准

检查系统和服务流程系统，以确保产品交付给客户，并可立即在计算机上使用。用现代科学管理

为不同的客户提供不同的技术和服务